Easycare Concentrate Mortar Stain And Calcium Remover (1 Litre)

£28.74 (inc VAT)
£23.95 (ex VAT)

Only available for Home Delivery

Only available for Collection

Stock Status - Across AVS Branches Your Branch -
  • Home Delivery available
  • Free Click & Collect available
  • Click & Collect delay
  • Home Delivery unavailable
  • Free Click & Collect available
  • Home Delivery delay
  • Click & Collect delay
  • Place your order and we’ll be in touch to confirm a delivery date. Collect same-day if stock available.

    Updated: Loading Icon
    Branch Postcode Stock Level
    Ashford TN23 Loading Icon
    Aylesbury HP17 Loading Icon
    Basingstoke RG25 Loading Icon
    Bishop’s Stortford SG11 Loading Icon
    Chichester PO20 Loading Icon
    Guildford GU8 Loading Icon
    Havant PO9 Loading Icon
    Henfield BN5 Loading Icon
    Lewes BN8 Loading Icon
    Peterborough PE1 Loading Icon
    Rudgwick RH12 Loading Icon
    Wokingham RG40 Loading Icon
    Worthing BN12 Loading Icon
    {"updated":"22-04-2024 10:01","stock":{"101":0,"102":0,"103":0,"104":0,"106":0,"108":0,"111":0,"112":7,"115":0,"116":5,"117":0,"170":5,"118":0,"120":0}}


    Mortar Stain and Calcium Remover stands out as a rapid and potent ecological cleaner, specifically crafted to eliminate cement residue deposits, scale, oxidation, and atmospheric contamination efficiently. Setting itself apart from conventional acidic or alkaline cleaners, this solution doesn't necessitate neutralization following application.

    Product Information: 

    • Removes cement residue, scale, oxidisation and calcium deposits
    • No post neutralisation required
    • Perfect for removing cement residue from tools
    • 1 litre clean up to 60m2
     Installation Method:
    1. Shake - Shake well before use.
    2. Dampen - Dampen the target surface with clean water.
    3. Apply - Add 1 dose (100ml) to 1 litre of clean water. Apply using garden sprayer, watering can or brush.
    4. Wait - Agitate with a brush and leave for 10 minutes. Do not allow the surface to dry before completing the next step.
    5. Reapply - repeat step 3 and leave for a further 5 minutes. 
    6. Finish - Rinse thoroughly with clean water or use a power washer. 
     Installation Method:
    1. Sweep - Brush away any leaves or debris from the target area.
    2. Apply - Apply a generous coat with garden sprayer, roller or brush.
    3. Wait - Leave to work for up to 8 hours.
    4. Finish - Rinse the contaminated area with a power washer.
    View AllClose