Description
Efflorescence Remover+ is a non-acidic chemical designed to eliminate efflorescence, those unsightly white deposits commonly found on paving, brickwork, and cement surfaces. What sets it apart is its unique ability to not only remove the existing deposits but also neutralize the salts present within the substrate. This dual action significantly reduces the likelihood of the efflorescence reappearing.
Efflorescence refers to any white deposit that forms on surfaces like paving, brickwork, and cement. These deposits can stem from various salt types, necessitating different treatment approaches.
If the deposit appears fluffy and can be brushed or washed away, it's likely sodium-based. Efflorescence Remover+ is the ideal solution for such cases.
However, if the deposit is hard and resistant to water or brushing, it's probably calcium-based. In such instances, Mortar Stain & Calcium Remover is recommended. While it effectively removes the white deposits, it doesn't offer preventive measures against potential reoccurrence.
- Organic formula dissolves and neutralises salts for long-lasting results
- Prevents salt deposits returning
- Simply apply, leave for 2 hours, then wash away
- 1 litre super concentrate cleans up to 60m2
- Shake - Shake well before any use
- Apply - Add 1, 100ml dose to 1 litre of clean water. Saturate the affected area with the solution.
- Reapply - Repeat step 2 after leaving the solution to work for at least 1 hour.
- Wait - Allow 24 hours before washing the surface to allow deep penetration and neutralisation of the target salts.
- Finish - Wash the surface with a hose, brush or power washer.
