AVS garden sheds are manufactured by Albany Sheds, a UK-based company who have been creating quality, long-lasting garden buildings and outdoor storage since 1984.
The Rutland Corner Shed is a 5 sided garden building that comes complete with a top quality lock and key, full tongue and grooved timber floors and roofs, thick 15mm cladding and is constructed using solid 45 x 34mm timber framing to ensure a long life. The single door is 790 x 1750mm and the unit has an internal height of 1.8 – 2.0m. It is factory treated and stained with a water based red cedar colour treatment, and supplied with heavy 20kg roofing felt, glass, trims and all fixings required to install the building.
- Five sided corner shed
- Thicker than average tongue & groove shiplap, including floor and roof
- Fully framed and braced door
- Three galvanised tee hinges
- Glass windows
SIZES & INFORMATION
Size L x W x H: The Length x Width x Height (to the top of the roof) in metres. The Length and Width refer to the two back sections, which are the longest sections. If you imagine a square with a corner cut off, the Length and Width would be the two intact sides of the square.
CLADDING & FRAMING
Cladding and framing make up the panels from which this building is constructed. In general, the thicker the cladding and framing, the stronger the shed will be and the longer it will last. All the panels on this building are made from sustainably sourced 15mm thick cladding and 45mm x 34mm thick framing. Please note this is the finished size after machining (some companies quote the size before machining).
Once you have placed your order, we will call you to discuss these options. Indicative extra costs shown where known (ex VAT):
- Toughened glass
- No windows
- Opening windows
- 1.2m double doors (lock replaced by pad bolt)
- Door hinged on the right (on left as standard)
- Wider 900mm single door
- Stable door - £40
- Rockingham door - £110
- Window inserts (as Warwick Conversion)
- Rim lock and handle (not available for double doors)
- 150mm extra height
- Shedsheet rubber roof covering
All sizes are approximate, based on external measurements (unless stated otherwise) - they do not include roof overhang. Please allow for any overhangs when choosing the size of your building, bearing in mind space required for installation and maintenance. We advise you check internal sizes if buying a building for a specific purpose, or any other sizes if critical. Planning permission can be required on some buildings depending on size and location, please check with your local council if unsure.