Save time and money with our new Lap Panel Kit with Timber Post – buy with one click to get the fence panelling you need.
With a height of 1.65m (5’4") these kits are ideal to add privacy to your outdoor space and the beautiful, high quality finish natural timber is pre-treated, meaning it's protected against the elements and looks good from the moment it's built.
Lap panels are made of horizontally-running timber that run the width of the panel – our panels are fully framed for longevity, security and privacy.
Our heavy-duty UC4 timber fence posts are made from rough-sawn green timber that's been pressure-treated to ensure it's longer-lasting, even when in the ground. Our panel kits have all you need to put up a fence panel AND are 20% cheaper than buying the products separately. Or you can buy this product in high-quality brown wood here.
The only tools you'll need are a screwdriver, tape measure, bucket, spirit level, post-hole digger (or spade) and hammer.
This kit contains a natural wood lap panel, a natural wood timber post, two bags of Post Mix, a natural wood gravel board, two cleats and six galvanised panel-fixing clips.
Our high-quality Natural Wood Lap Panel Kit with Timber Post contains:
1 x Green Timber Lap Panel (width 1.83m, height, 1.65m)
1 x Natural Wood Timber Post 100x100mm in UC4 kiln-dried (2.4metre high)
2 x Post Mix Concrete Bags (approx 20kg)
1 x Natural Wood Gravel Board (150x25mm)
2 x 150mm Cleats (50x25mm)
6 x 46mm Fence Clips
• If you share the fencing or boundary with a neighbours, be sure to run your plans to put up a new fence past them before you start.
• It's easier to get someone to help you when replacing a fence.
All the direct ground contact wood we supply is UC4 rated (unless stated otherwise).
What does UC4 mean?
This means the wood is kiln-dried to remove as much moisture as possible and then flushed with treatment that penetrates right down to the core and the sapwood around it to extend its life expectancy when it goes into the ground. This treatment can sometimes leave a slightly green tinge on the wood (that may be mistaken for mould), this is completely normal and will disappear over time. Because of this extensive treatment, this wood can last up to 15 years with minimum treatment.