Save time and money with our new Natural Wood Closeboard Panel Kit with Timber Post – buy with our one-click option and get the fence panelling you need.
With a height of 1.65m (5’4") these kits are ideal to add privacy to your outdoor space and the beautiful, high quality finish pre-treated timber is left natural, meaning it's protected against the elements and looks good from the moment it's built.
Closeboard panels are horizontally-running fence panels that run the width of the panel – our panels are fully framed for longevity, security and privacy. What's more, our panel kits have all you need to erect a fence build AND are 20% cheaper than buying the products separately. Why not match your new fence with our high-quality artificial grass?
The only tools you'll need are a screwdriver, tape measure, bucket, sprit level, post-hole digger (or spade) and hammer.
This kit contains a natural wood closeboard panel, a natural timber post, two bags of Post Mix Concrete, a natural wood gravel board, two cleats and six galvanised panel-fixing clips to attach them.
Our high-quality Natural Wood Closeboard Panel Kit with Timber Post contains:
1 x Closeboard Panel in Natural Wood (1.83m wide, 1.65m high)
1 x Natural Timber Post 100 x100mm in UC4 kiln-dried natural wood (2.4metre high)
2 x Post Mix Bags (approx 20kg)
1 x Natural Gravel Board (150x25mm)
2 x 150mm Cleats (50x25mm)
6 x 46mm Galvanised Fence Clips (46mm)
Our experts say...
• If you share the fencing or boundary with a neighbours, be sure to run your plans to put up a new fence past them before you start.
• It's easier to get someone to help you when replacing a fence.
Our heavy-duty UC4 fence posts are made from rough-sawn timber that's been pressure-treated to ensure it's longer-lasting, even when in the ground.
All the direct ground contact wood we supply is UC4 rated (unless stated otherwise).
What does UC4 mean?
This means the wood is kiln-dried to remove as much moisture as possible and then flushed with treatment that penetrates right down to the core and the sapwood around it to extend its life expectancy when it goes into the ground. This treatment can sometimes leave a slightly green tinge on the wood (that may be mistaken for mould), this is completely normal and will disappear over time. Because of this extensive treatment, this wood can last up to 15 years with minimum treatment.
Find out more about our details of our 0% finance offer