Save time and money with our new Lap Panel Kit with Concrete Post – buy with one click to get the fence panelling you need.
With a height of 1.65m (5’4") these kits are ideal to add privacy to your outdoor space and the beautiful, high quality green timber in natural colour is pressure treated meaning it's protected against the elements and looks good from the moment it's built.
Lap panels are horizontally-running fence panels that run the width of the panel – our panels are fully framed for longevity, security and privacy. What's more, our panel kits have all you need to put up a fence panel AND are cheaper than buying the products separately. Buy the same product in high-quality closeboard wood.
The only tools you'll need are a screwdriver, tape measure, bucket, spirit level, post-hole digger (or spade) and hammer.
This kit contains a natural wood lap panel, a concrete post, two bags of Post Mix and a concrete gravel board.
Our Natural Wood Lap Panel Kit with Concrete Post contains:
1 x Green Timber Lap Panel (width 1.83m, height, 1.65m)
1 x Concrete Post 2.44M high Concrete Slotted Intermediate Post (94mm x 109mm)
2 x Post Mix Concrete Bags (approx 20kg)
1 x Concrete Gravel Board (Recessed) (1.83m x 150mm x 50mm)
Our experts say...
• If you share the fencing or boundary with a neighbours, be sure to run your plans to put up a new fence past them before you start.
• It's easier to get someone to help you when replacing a fence.
All the direct ground contact wood we supply is UC4 rated (unless stated otherwise).
What does UC4 mean?
This means the wood is kiln-dried to remove as much moisture as possible and then flushed with treatment that penetrates right down to the core and the sapwood around it to extend its life expectancy when it goes into the ground. This treatment can sometimes leave a slightly green tinge on the wood (that may be mistaken for mould), this is completely normal and will disappear over time. Because of this extensive treatment, this wood can last up to 15 years with minimum treatment.