Save time and money with our new Brown Wood Lap Panel Kit with Timber Post – buy with one click to get the fence panelling you need.
With a height of 1.65m (5’4") these kits are ideal to add privacy to your outdoor space. The beautiful, high quality finish pre-treated timber is treated in a dark brown wood preserver, meaning it's protected against the elements and looks good from the moment it's built.
Lap panels are horizontally-running fence panels that run the width of the panel – our panels are fully framed for longevity, security and privacy.
Our heavy-duty UC4 timber fence posts are made from rough-sawn timber that's been pressure-treated to ensure it's longer-lasting, even when in the ground. What's more, our panel kits have all you need to replace a fence panel AND are cheaper than buying the products separately. We also have this product in quality natural wood.
The only tools you'll need are a screwdriver, tape measure, bucket, spirit level, post-hole digger (or spade) and hammer.
This kit contains a brown lap panel, a brown timber post, one bag of Post Mix, a brown gravel board, two brown cleats and six galvanised panel-fixing clips.
Our high-quality Brown Wood Lap Panel Kit with Timber Post contains
1 x Brown Lap Panel (width 1.83m, height, 1.65m)
1 x Brown Timber Post 100 x100mm in UC4 kiln-dried (2.4metre high)
1 x Post Mix Concrete Bag (approx 20kg)
1 x Brown Timber Gravel Board (150x25mm)
2 x 150mm Cleats (50x25mm)
6 x 46mm Fence Clips (46mm)
Our experts say...
• If you share the fencing or boundary with a neighbours, be sure to run your plans to put up a new fence past them before you start.
• It's easier to get someone to help you when replacing a fence.
All the direct ground contact wood we supply is UC4 rated (unless stated otherwise).
What does UC4 mean?
This means the wood is kiln-dried to remove as much moisture as possible and then flushed with treatment that penetrates right down to the core and the sapwood around it to extend its life expectancy when it goes into the ground. This treatment can sometimes leave a slightly green tinge on the wood (that may be mistaken for mould), this is completely normal and will disappear over time. Because of this extensive treatment, this wood can last up to 15 years with minimum treatment.