Description
Save time and money with our new Lap Panel Kit with Timber Post. Our panel kits have all you need to put up a fence panel AND are cheaper than buying the products separately. The only tools you'll need are a screwdriver, tape measure, bucket, spirit level, post-hole digger (or spade) and hammer.
This kit contains a natural wood lap panel, a natural wood timber post, two bags of Post Mix and four galvanised panel-fixing clips.
Our high-quality Natural Wood Lap Panel Kit with Timber Post contains:
1 x Green Timber Lap Panel (width 1.83m, height, 1.65m)
1 x Natural Wood Timber Post 100 x 100mm in UC4 kiln-dried (2.4m high)
2 x Post Mix Concrete Bag (approx 20kg)
4 x 46mm Fence Clips
Top Tips
- If you share the fencing or boundary with a neighbours, be sure to run your plans to put up a new fence past them before you start
- It's easier to get someone to help you when replacing a fence
- All the direct ground contact wood we supply is UC4 rated (unless stated otherwise)
