Description
Save time and money with our Closeboard Panel Kit with Timber Post. Our panel kits have all you need to erect a fence build AND are cheaper than buying the products separately. The only tools you'll need are a screwdriver, tape measure, bucket, spirit level, post-hole digger (or spade) and hammer.
This kit contains a green timber closeboard panel, a green timber post, two bags of Post Mix Concrete, a green timber gravel board, two cleats and four galvanised panel-fixing clips to attach them.
Our high-quality Green Timber Closeboard Panel Kit contains:
1 x Closeboard Panel in Natural Wood (1.83m wide, 1.65m high)
1 x Natural Timber Post 100 x100mm in UC4 kiln-dried natural wood (2.4m high)
2 x Post Mix Bag (approx 20kg)
1 x Natural Gravel Board (150x25mm)
2 x 150mm Cleats (50x25mm)
4 x 46mm Galvanised Fence Clips (46mm)
Top tips
- If you share the fencing or boundary with a neighbours, be sure to run your plans to put up a new fence past them before you start
- It's easier to get someone to help you when replacing a fence
- All the direct ground contact wood we supply is UC4 rated (unless stated otherwise)
