Garden Gates

Fieldgates - Softwood >

Fieldgates - Hardwood >

Driveway - Softwood >

Driveway - Hardwood >

Garden Gates - Low >

Garden Gates - Tall >

Field Gates - Metal >

GATES

Fence & Driveway Gates

AVS Fencing sells in this online shop a range of gates so whether it is a fence gate a driveway gate or a field gate AVS Fencing have the gate for you. If it is a solid gate it is likely to be divided into a pair to reduce the size of each gate leaf. If it is an open design of lower level gate, such as a field gate (which in spite of the traditional name are often chosen for driveway gates) it's more likely to be used as a single gate. They are normally available in widths up to 3.6metres but may be available in a greater width to order. All of our gates are available in either hardwood or softwood depending upon customer preference or budget.

Automatic Driveway Gates

AVS are able to provide gates for automation, they are similar to manual gates except that the gate is strengthened to allow the automatic opening using a motor of some sort. The reason gates have to be strengthened when they are automated is because there is more stress on one particular part of the gate, meaning that without strengthening it can bend and bow over time.

Occasionally a property has a very short distance between the gates and the front of the house and in this instance consideration needs to be given to enabling the gates to be closed after a vehicle has entered the premises. In this situation a pair of gates would always be used as this halves the distance needed to clear any vehicle parked inside the gates. Another concern that people often experience is where the ground rises inside the gateway, again using a pair of gates will improve this situation and gates can be set to rise up as they open. Another common problem experienced when planning gates is if there is a slope across the gate opening, this is harder to deal with without re-profiling the driveway. It is likely that a gap will be left under the gate on the lowest side of the driveway as the gate will have to be set level across the opening and can only be lowered to the highest point in the drive.

Field Gates

Field gates can provide an attractive driveway gate with an open design, it does not catch the wind so in windy locations it is ideal. Field gates can be automated and they can span a roadway in a single width; up to a maximum of approximately 4 metres. The field gates can be manufactured from hardwood, such as iroko or oak, or from treated softwood. Which timber you choose is mainly down to personal preference.

A fence gate can be of any size or style, AVS Fencing is able to provide all types of fencing gates far beyond the designs shown on this website, so if you require a fence gate to complete your fencing please contact your local branch. A fence gate will generally be manufactured 50mm shorter than the height of the fence, the reason being to allow a tolerance at ground level to allow the fence gate to swing easily without striking the ground when it is opened. Fencing gates up to 1200mm wide are normally hung on simple ‘T’ hinges and close using a ring latch which may be locked with a bolt for additional security.