




Lattice or trellis should be installed between posts or on to a wall or fence line.
Trellis can be attached to the fence posts by simply nailing through the side battens into the post. The suggested size of nail would be the 65x2.65mm nail (see nails).
Lattice is attached in a very similar way except instead of nailing through side battens, nail through the frame.
Fence panel clips can also be used to attach lattice between posts.
For attaching trellis or lattice onto walls, pre-drill holes and use hammer fixings (see
hammer fixings).
©Copyright AVS Fencing Supplies Limited 2012 |
||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||