Post And Rail Fence Blogs

Post & Rail is a generic term used to describe any fencing system comprising of solid timber post & rails and has three main variations comprising of Cleft, Half-Round & Square Cut.

The system combines a robust and traditional design, with good vision through the fence and also has the added benefit of being able to be used as an attractive option as a livestock barrier.

Points to Consider:

When deciding upon the style and type of Post & Rail Fencing system you wish to install, you should consider the following areas:

• Will the fence be suitable for the job required?
• How quickly do you want to erect the fence?
• What's Your Budget?
• Your Personal Preference (What look do you prefer?)

Additionally if the fence is to be erected to contain stock, then consideration should be given to the number of rails required. This is naturally determined by the size of the stock animal that is to be contained. I.e. For smaller animals more rails per bay of fence are required, unless you intend to add livestock netting to the fence.

Your Options:

Chestnut Cleft –

Cleft is one of AVS's most popular sellers and the timber we supply is usually sourced and cut locally in Kent or Sussex coppice. This means the timber re-grows for future harvesting and hence is a sustainable and environmentally friendly system.

This variation has many advantages for users. Firstly the manufacturing process of the rail means that it retains a face with bark initially intact and this helps to add to this systems rustic appeal. Secondly this system offers a versatile solution as there is an option to swap the cleft posts with softwood or oak posts, depending on available budget & preference. Finally when the fence is erected the rail can be slotted into a morticed hole within the post, which gives even greater strength to the fence system.

Square Cut Post and Rail –

This refers to any type of post and rail whose rails are sawn along their length creating a rectangular rail. This system is normally cheaper than Cleft and has a cleaner appearance preferred by some.

When the fence is erected the rails are normally nailed to intermediate posts, which are set at 1.8M centres. This is combined with a staggering of the rails joints, to ensure that the fences weight is distributed evenly.

With this variation of fence system it is also possible to have the posts pre-pointed so that they can be driven into the ground during erection. This helps speed the erection process and is a great benefit when undertaking large jobs.

Half Round Post and Rail –

Very similar to the square cut above except that the rails are half round and the posts are either round or half round. Round posts are used when erecting the fence mechanically and also give more strength. Either Peeled and treated (which fluctuate in girth from end to end) or Machine rounded (uniform in section) can be used according to taste and budget. Morticing is not usually an option so rails are nailed into position. Overall this type of system offers a very attractive fence at a modest budget.

Summary

This article should act as a useful starter guide when deciding upon a suitable post & rail fence system for your premises. However before you begin we would recommend you speak to one of AVS’s knowledgeable advisers, who will be happy to answer any questions you may have and provide you with a free quote.