In our previous blog tip, we advised you whether you needed to concrete your fence posts. If after reading that post, you decided not to get the concrete out, we suggest that you read the following to find out how you can ensure that your non-concreted fence posts stay secure.

• First off, backfill the fence post hole with excavated soil;
  
• You should have a good length of wood (or similar) to use as a rammer;
• Ensure you dig the hole big enough to get the rammer all around, which will ensure the fence post gets right down to the bottom of the hole;
• Fill the hole very slowly, and stop at frequent intervals to ram the soil down firmly;
• Concentrate most on the bottom of the hole and the top of the hole;
• Try and get as much soil as possible back into the hole.

There you go, simple. Even if the latest budget hasn't been your 'Darling' and you can't afford the concrete. Rest assured, you can still erect a firm, secure fence post!

Whether your fencing is for domestic or commerical purposes, most fence posts require concreting into the ground to prevent the wind loosening the fence post. Ready mix post mix is dry ready mix concrete in a bag. It is really easy to use, just tip it in the hole around the fence post and add water – job done simple as that! No messing around and no need to premix in the wheelbarrow or on a board.

What’s more the post mix is made from rapid hardening cement that goes off faster than conventional concrete meaning your fence is very soon safe and can’t be damaged by the wind during erection.

What is the other option? Buy ballast (a mix of pebbles and sand) and to mix this up firstly with cement powder and secondly with water to produce concrete which is added wet to the fence post hole.

Interesting Fact: Did you know that the Romans invented concrete, which when fused with their engineering expertise, allowed for the creation of villas, temples, towns, baths, walls, roads – the list is endless. So next time you think about Ready Mix Post Mixing your fence post – the Vatican City isn't that far away!

You don't have to join The Green Party to help planet earth. You can simply use gravelboard when you are erecting your garden fence! Why? Because then your fences will last longer, and you will be saving lots of trees, as well as saving yourself heaps of money and backbreaking work in the future.

What are Gravelboards?

Gravelboards fit under a fence at ground level. They can be timber gravel boards which are used withTimber Posts or Concrete Gravelboards used with slotted concrete fence posts. These are normally 6”/150mm or 12” / 300mm high.

Whats the purpose of Gravelboards?

1. 
   Gravelboards keep expensive timber fence panels or fence pales ends off of the damp ground thus protecting from rotting. Timber gravelboards are cheap and easy to replace so can in a way be sacrificed.
2. 
   Gravelboards are essential for fencing on sloping ground. Fence panels have to be stepped which can leave a gap at ground level – a gravel board can help as one end can be buried into the ground meaning the other end will fill the gap.
3. 
   Concrete gravelboards (the type used for fence panels and with concrete fence posts), can be used to hold back soil if ground levels on each side of fence different. For example, between your garden and your neighbours garden.

Remember to allow for longer posts to accommodate – sometimes you can use lower panels so the fence does not become too tall. Like Fence Panels, gravelboard is normally fixed between posts rather than on the front face, therefore, wood blocks called cleats are normally used to aid fixing with nails.

Gravelboards can be used anywhere there is garden fencing, not forgetting, commercial sites like factories .