AVS Fencing Blog

Luckily we are discussing fence posts, and not the Royal Mail's post or this blog would never of got written!

Back to fence posts, anyone can dig a fence post hole. It is easy but like most tasks you need the right tools.

Contractors use a long handled graft because it has the weight and the length to get into hard compacted soil, so that you do not need to kneel down. The next best thing to do (if you only have a few holes) is to use a garden border spade – the small ones with a blade approx 5-6" wide.

What does a good fence post hole look like?
It is about (2' 6" ) 750mm deep and about 250mm (10") square with straight sides. The size of a fence post will change slightly depending on post size.

How do I get the soil out?
If the hole is big enough (be careful not to make it too big), you will be able to get the soil out with the spade. If you have a lot of holes to dig. it is even easier with a double handled post hole digger, this is what contractors use.

What if the ground is stony or has concrete in it?
The answer is to use a 5' long crowbar or a power tool with a breaker attachment.

Top Tip:
How to dig out an old concrete fence post base:
Dig a hole in the soft soil immediately to one side of the concrete base to the full depth required. Once you have done this spit the concrete with a bar or breaker and lift the big chunks out. Don't make the same mistake a lot of people do, which is trying to break the concrete straight way. You will be rewarded by little chips of concrete and it will turn out to be a real marathon job.